LEED v4, Sustainability and Green Manufacturing
LEED v4 (Leadership in Energy and Environmental Design) is a voluntary, consensus-based national rating system for developing high-performance, sustainable buildings developed by The U.S. Green Building Council (USGBC).
The LEED v4 for New Construction and Major Renovations Rating System guides and distinguishes high-performance commercial and institutional projects. The Rating System consists of six categories, listed with Cornell’s contribution toward them as follows:
- Sustainable Sites. This category is not applicable to the use of Cornell products.
- Water Efficiency. This category is not applicable to the use of Cornell products.
- Energy and Atmosphere. This category is not applicable to the use of Cornell products.
- Materials and Resources
Materials and Resources Credit 4: Recycled Content
Cornell product components contain Post Industrial and Post Consumer recycled content as listed below. Please note that Product Type and Product Size determine final Recycled Content calculation results. Precise Recycled Content information can be provided when dimensioned products are identified, excluding TranZform®, Side Folding Grille Products and Extreme® Performance Rubber Doors. The precise post industrial and preconsumer values are calculated by internal programming systems based on the build sheets for each door.
Cornell Recycled Content, All Products Except TranZform Accordion Products, Side Folding Grille Products and Extreme Performance Rubber Doors, 2012
- Prepainted Steel Curtain and Hood Material
- 7% Post Industrial (Pre-Consumer)
- 23% Post Consumer
- Structural Steel Bottom Bar Angle
- 17% Post Industrial (Pre-Consumer)
- 83% Post Consumer
- Structural Steel Guide Angle
- 40% Post Industrial (Pre-Consumer)
- 56% Post Consumer
- General Steel Components in Shafts and Brackets
- 33% Post Industrial (Pre-Consumer)
- 0% Post Consumer
- Stainless Steel, #4 Finish only, in Curtain, Hood, Bottom Bar and Guides
- 67% Post Industrial (Pre-Consumer)
- No recycled content in Aluminum
- No recycled content in Structural Stainless Steel Guides
- No recycled content in Galvanized Grille Rods or Stainless Steel Grille Rods
- Aluminum Extrusions
- 0% Post Industrial (Pre-Consumer)
- 0% Post Consumer
- Vinyl Extrusions
- 75% Post Industrial (Pre-Consumer)
- 10% Post Consumer
- Slats, Metal Hinges, Formed Steel Lead Posts and Jamb Attachments
- 25% Post Industrial (Pre-Consumer)
- 25% Post Consumer
- Aluminum Extrusions
- 80% Post Industrial (Pre-Consumer)
- 10% Post Consumer
Materials and Resources Credit 5: Regional Materials
Cornell products excluding Side Folding Grilles and Extreme Performance Rubber Doors are manufactured in Mountaintop, Pennsylvania, 18707 USA
- Prepainted Steel Curtain and Hood Material
- Indoor Environmental Quality. This category is not applicable to the use of Cornell products.
Note that all Cornell finishes are applied by the time the product is shipped. No finishes or paints are applied to products on-site. VOC information is not applicable for LEED EQ 4.1- 4.4 credit. - Innovation and Design Process. This category is not applicable to the use of Cornell products.
*LEED v4 is a trademark of The U.S. Green Building Council.
Comprehensive LEED v4 Guides
by product
Counter Door
View LEED Info | View Product
Credit category: 4 | Max Points: 18 |
Counter Fire Door
View LEED Info | View Product
Credit category: 4 | Max Points: 18 |
Service Fire Door
View LEED Info | View Product
Credit category: 4 | Max Points: 18 |
Firemiser Insulated Fire Door
View LEED Info | View Product
Credit category: 5 | Max Points: 38 |
Service Door
View LEED Info | View Product
Credit category: 4 | Max Points: 18 |
Thermiser Insulated Door
View LEED Info | View Product
Credit category: 5 | Max Points: 38 |
Thermiser Max IECC 2012 & ASHRAE 90.1 Compliant Insulated Door
View LEED Info | View Product
Credit category: 5 | Max Points: 38 |